Vandal Resistant IP Intercom
Vandal Resistant IP Intercom • Powerful audio technology including high sound pressure, automatic volume gain control, and active noise echo canceling • Vandal Resistant Design with IK08 • IP55 – Dirt, dust and water resistant • Designed in stainless steel (AISI 316L) to withstand corrosion • 2 Relay outputs for remote control, e.g. doors, signal lamps and gates • Can operate in SIP, IC-EDGE and ICX-AlphaCom mode
The Vandal Resistant Substation IPVRS-1 is tough, durable and resilient, and designed for use in the harshest of environments. The station is typically used as a communication, information or emergency point and connects directly to the IP network making it easy to deploy – anywhere and at any distance.
| AUDIO | |||
|---|---|---|---|
| Noise cancelling – suppression of musical noise | YES | ||
| Noise cancelling – suppression of static noise | YES | ||
| Noise cancelling – suppression of rapidly changing noise | YES | ||
| Codecs | G.711, G.722, G.729 | ||
| Frequency range, G.722 Codec | 200 Hz to 7000 Hz | ||
| Audio technology | Modes: Full open duplex, switched open duplex | ||
| Adaptive jitter filter | |||
| Local tone generator | |||
| Audio mixing – 3 channels | |||
| Sound level detection (scream alarm) | |||
| Automatic gain control (microphone) | |||
| Automatic volume adjustment | |||
| 10 W class D | |||
| Electret microphone | |||
| 8 ohm |
| HARDWARE | |||
|---|---|---|---|
| Ethernet connector | 2 x RJ45 | ||
| All other connectors | Tool less, spring loaded, vibration proof terminals | ||
| General inputs and outputs | 6 (configurable), 12mA as LED drivers | ||
| Change-over relays (NO+NC+COM) | 2 relays, max: 60VDC, 2A, 60W | ||
| Power options | PoE and or external power supply | ||
| PoE (power over Ethernet) | IEEE 802.3af standard, Class 0 (0.44W to 12.95 W) | ||
| External power supply | 24 VDC (16 to 48 V) | ||
| Power consumption | Idle 1.8W, max 13W (depending on volume) | ||
| Audio line out / induction loop signal | 600 ohm |
| Construction | |||
|---|---|---|---|
| Dimensions (HxWxD) | 180 x 92 x 46 mm | ||
| Weight | 0.8 kg | ||
| Protection | Vandal resistant design, 2 mm stainless steel front, tamper proof loudspeaker grill, button and fastening screws | ||
| Mounting | Flush mount in 50 mm deep back box | ||
| Frontplate material | AISI 316L |
| NETWORKING AND PROTOCOLS | |||
|---|---|---|---|
| Protocols | IPv4 (with DiffServ), SIP, TCP, UDP, HTTPS, TFTP, RTP, DHCP, SNMP, Vingtor-Stentofon CCoIP® , NTP | ||
| LAN protocols | Power over Ethernet (IEEE 802.3 a-f) Network Access Control (IEEE 802.1x) | ||
| Management and operation | HTTP/HTTPS (Web configuration) DHCP and static IP + IC-EDGE, Remote automatic software upgrade, Centralized monitoring | ||
| Advanced supervision functions | E.g. network test, tone test, status reports | ||
| SIP support | RFC 3261 (SIP base standard) | ||
| RFC 3515 (SIP refer) | |||
| RFC 2976 (SIP info) | |||
| DTMF support | RFC 2833, 2976 (SIP info) |
| ENVIRONMENT AND COMPLIANCES | |||
|---|---|---|---|
| Operating temperature range | -40° to 70° C / -40° to 158 ° F | ||
| Storage temperature range | -40° to 70° C / -40° to 158 ° F | ||
| Relative humidity | < 95% not condensing | ||
| Ingress protection | With mounting box1008098000 (on wall): IP-44, With mounting box 1008098100 (flush mount): IP-55 | ||
| Impact protection | IK 8 | ||
| EMC | CE and FCC Part 15 |
| Other Specifications | |||
|---|---|---|---|
| Warranty | 2 Years standard warranty, extendible up to total of 5 years (additional fee) |
